What did you do to your bike today?

[LS6TT]

Added on some T-Rex Spool Adapters and a PIAA horn. Both were a pain in the ass to install. The bracket for the horn just didn't line up properly in order for it to work. I basically had to rig it up using a combination of the new bracket and the old one. I will say it is much much loader then the original. As I said the T-Rex adapters were also a pain to install. You got to be perfect in getting those holes to lineup so that you don't strip the threads on the bolts. I was kind of pissed they sent me the wrong spools too. I ordered the orange ones and they sent me black. I shot them an email to see what they will do to correct the issue, so we'll see.

Anyway, here are pics

Black looks better. I'm local and I've seen the orange.

 

[applejax]

Added on some T-Rex Spool Adapters and a PIAA horn. Both were a pain in the ass to install. The bracket for the horn just didn't line up properly in order for it to work. I basically had to rig it up using a combination of the new bracket and the old one. I will say it is much much loader then the original. As I said the T-Rex adapters were also a pain to install. You got to be perfect in getting those holes to lineup so that you don't strip the threads on the bolts. I was kind of pissed they sent me the wrong spools too. I ordered the orange ones and they sent me black. I shot them an email to see what they will do to correct the issue, so we'll see.

Anyway, here are pics

Took me 5 minutes to put the spool adapters on. I wouldn't call it a pain at all.

 

[Fyke34]

I lowered my front end 2 inches today. Looks way better

 

[6R Blackout]

Put my 2 guardian bells on my bike'


Sent from my iPhone using Tapatalk Casey (aka) Hunter77!

 

[Mitch21]

I lowered my front end 2 inches today. Looks way better

:needpics:

ostwhore:

 

[nismos14]

I lowered my front end 2 inches today. Looks way better

2" is a huge front drop!


The spool adapters were also a pain for me to install!

 

[Fyke34]

2" is a huge front drop!

ya but i was reading around and saw alot of people did this mod and havent had any problems. i think it looks pretty slick and has a much more aggressive look. it only took about 15 minutes so if it does give me any problems i can just change it back...if it doesnt kill me first

 

[applejax]

ya but i was reading around and saw alot of people did this mod and havent had any problems. i think it looks pretty slick and has a much more aggressive look. it only took about 15 minutes so if it does give me any problems i can just change it back...if it doesnt kill me first

Yes, a lot of people raise the forks, but no one has done 2" with or without also adjusting the height of the rear.

Just be careful, it might seem fine, but ya never know.

 

[Fyke34]

Yes, a lot of people raise the forks, but no one has done 2" with or without also adjusting the height of the rear.

Just be careful, it might seem fine, but ya never know.

i read a couple people on this site dropped theirs 1-3/4 to as low as 2 1/4. i dont know if you saw that super street bike magazine article but they did a 2 inch drop. thats actually how i got the idea then i did my nerd research lol.

 

[Wooster]

Black looks better. I'm local and I've seen the orange.

Well they are sending me the orange ones so we'll see. I will say i'm surprised on how great the customer service was with T-Rex racing. 10 minutes after contacting them on the issue and they already emailed me a tracking number for the new ones.

 

[Marthy]

Tire swap to Conti Motion, oil & filter change and front fork oil change to 20W.

A little note here on the fork oil change. I'm about 25K miles and was way over due! I'll start changing oil every 15K or so from now on. You'll be amaze how much metal shaving was in there and how dirty the oil was. Look like a car oil change push all the way to 25K miles! LOL

Can't wait to see the difference with 20W oil. I'll wait on the fork springs... see how it goes.

 

[nismos14]

Installed the power tip in the TBR, a little too quiet for me, but I'll keep it in for a while.

 

[BoneJj]

Installed the power tip in the TBR, a little too quiet for me, but I'll keep it in for a while.

It wouldn't be that hard to modify that silencer to allow for a little more sound. Modify it a little at a time until you get the desired level that you like.

 

[nismos14]

It wouldn't be that hard to modify that silencer to allow for a little more sound. Modify it a little at a time until you get the desired level that you like.

Yea I suppose, but I also have a p1 coming my way so I will try that out and see if 2-3 db is enough and maybe go with that. We shalll seee..

 

[Nastybutler]

Yea I suppose, but I also have a p1 coming my way so I will try that out and see if 2-3 db is enough and maybe go with that. We shalll seee..

I did get that in the mail on Monday, Priority mail too.

 

[daddyrack]

More like what i didnt do. I just got 4 wisdom teeth cut out so i cant ride and its sooo gorgeous out.

 

[JT]

What does the power tip do? not familiar with

 

[nismos14]

I did get that in the mail on Monday, Priority mail too.

Great! Thanks.

 

[nismos14]

More like what i didnt do. I just got 4 wisdom teeth cut out so i cant ride and its sooo gorgeous out.

Sucks, wife had hers out about 6 weeks ago, painfulll.

What does the power tip do? not familiar with

Brings down the volume of the Two Brothers Exhaust.

 

[Fenixgoon]

had to do a small road trip for work today..hit some back roads to make it interesting