Idiosynocracy
New Member
That sucks! Was the wax coating still on the tire? I know sometimes that can cause a problem for people...
-
Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.
What did you do to your bike today?
- Thread starter Diluted
- Start date
That sucks! Was the wax coating still on the tire? I know sometimes that can cause a problem for people...
Watched 12" of snow destroy the chances of me riding anytime soon. This is enough already.
Nope, couple more inches coming now. LOL! I have a huge driveway and had it cleared during the lull.
latony007
New Member
Im telling you, you are not going to want to leave thousand oaks! its one of the best towns to live in CA and currently 80
Me too man, at least bigger than any of my neighbors and its lined with big *** bushes so I have no where to throw the snow!!
I'm sure of it, but I can't leave my family
Idiosynocracy
New Member
Same here in Hesperia. It was about 75-80 degrees today and it was amazing. Wish I could send some of it to everyone being raped by winter storms... : (
Riccochet
New Member
Got like 8 inches of snow and 1-2 inches of ice here in N.C. Sucked. But it'll be in the 50's and 60's next few days. lol.
RyanChristenson
New Member
My bike is still pulled apart waiting on some things to finish my turn signals in the air intakes so I'm not too bummed out that can't ride. Looking a forecast may not be too far away here in Iowa.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
yesterday : i spent 2 hours with the snow blower, blowing snow out of the garage door and drive way, someone left the door open over night and snow blew in all over my bike and tools, it blew into the garage like 10 feet, we got like 16 inches of snow! needless to say i dont think I'm going anywhere on my bike for at least a week.
Sucks, my bike was moved into a shed addition with no door and keeps getting snow blown in there, but not too bad. My baby will be garaged one way or another next year. Got almost 24" here 40 miles northwest of Philly.
Riccochet
New Member
Yall got nailed with snow up there. Glad I don't live in Perkasie any longer. lol
Wow, Perkasie is right down the road, it's where my father-in-law was born and raised. Small world!
Riccochet
New Member
We probably know some of the same people. My wife is from Quakertown. Hell, if you ever hung out at Ed's Q-Town we probably met. lol
D52
New Member
I seem to be to the only one I know who still isn't hating the snow. Then again, I ski so that may have something to do with it... 
Anyways, after a few months of not being on this site at all, I've been back several times the past few days looking for ideas and information on flush mounts and tail lights. Before I knew it, I had spent over 2 hours in one sitting alone on here reading, clicking links and learning. When I was done, I was quite amazed with the volume of information on here.
(For the record, I went with MotoDynamics. I've found mostly good marks on their products, as well as the company itself, plus I've seen the integrated tail lights on a couple bikes in my area and liked the look. So flush mounts now ordered and holding out for the smoked tail lights to come back in stock... it's not like I don't have time to wait considering all the snow! Now I just need to find a good FE that works well with the MotoDynamics prodcuts and possibly some LED lighting to counter the reduced visibility of the flush mounts and I'll be good to go for this round of mods.)
So just want to extend a very appreciative thank you to everyone who has taken the time to post their ideas and feedback on various products. May we all have better riding weather soon... but let me enjoy my trip to VT next week first!
Anyways, after a few months of not being on this site at all, I've been back several times the past few days looking for ideas and information on flush mounts and tail lights. Before I knew it, I had spent over 2 hours in one sitting alone on here reading, clicking links and learning. When I was done, I was quite amazed with the volume of information on here.
(For the record, I went with MotoDynamics. I've found mostly good marks on their products, as well as the company itself, plus I've seen the integrated tail lights on a couple bikes in my area and liked the look. So flush mounts now ordered and holding out for the smoked tail lights to come back in stock... it's not like I don't have time to wait considering all the snow! Now I just need to find a good FE that works well with the MotoDynamics prodcuts and possibly some LED lighting to counter the reduced visibility of the flush mounts and I'll be good to go for this round of mods.)
So just want to extend a very appreciative thank you to everyone who has taken the time to post their ideas and feedback on various products. May we all have better riding weather soon... but let me enjoy my trip to VT next week first!
JRT88
New Member
I seem to be to the only one I know who still isn't hating the snow. Then again, I ski so that may have something to do with it...
Anyways, after a few months of not being on this site at all, I've been back several times the past few days looking for ideas and information on flush mounts and tail lights. Before I knew it, I had spent over 2 hours in one sitting alone on here reading, clicking links and learning. When I was done, I was quite amazed with the volume of information on here.
(For the record, I went with MotoDynamics. I've found mostly good marks on their products, as well as the company itself, plus I've seen the integrated tail lights on a couple bikes in my area and liked the look. So flush mounts now ordered and holding out for the smoked tail lights to come back in stock... it's not like I don't have time to wait considering all the snow! Now I just need to find a good FE that works well with the MotoDynamics prodcuts and possibly some LED lighting to counter the reduced visibility of the flush mounts and I'll be good to go for this round of mods.)
So just want to extend a very appreciative thank you to everyone who has taken the time to post their ideas and feedback on various products. May we all have better riding weather soon... but let me enjoy my trip to VT next week first!
You should look up creese1 on eBay for a fe. They r made well, cheap, and life time warranty. The license plate light on the motodynamic tail light works with his fe
Idiosynocracy
New Member
I seem to be to the only one I know who still isn't hating the snow. Then again, I ski so that may have something to do with it...
Anyways, after a few months of not being on this site at all, I've been back several times the past few days looking for ideas and information on flush mounts and tail lights. Before I knew it, I had spent over 2 hours in one sitting alone on here reading, clicking links and learning. When I was done, I was quite amazed with the volume of information on here.
(For the record, I went with MotoDynamics. I've found mostly good marks on their products, as well as the company itself, plus I've seen the integrated tail lights on a couple bikes in my area and liked the look. So flush mounts now ordered and holding out for the smoked tail lights to come back in stock... it's not like I don't have time to wait considering all the snow! Now I just need to find a good FE that works well with the MotoDynamics prodcuts and possibly some LED lighting to counter the reduced visibility of the flush mounts and I'll be good to go for this round of mods.)
So just want to extend a very appreciative thank you to everyone who has taken the time to post their ideas and feedback on various products. May we all have better riding weather soon... but let me enjoy my trip to VT next week first!
DMP Fender eliminator kit works as well. I have the Motodynamic taill ight and it's nicely built, not sure about lifetime warranty but I like it.
the latestest addition to my stable... not directly on the bike...but primarily for the bike...
http://www.600cc.org/forum/picture.php?albumid=457&pictureid=5578
http://www.600cc.org/forum/picture.php?albumid=457&pictureid=5579
warning pictures are huge!
http://www.600cc.org/forum/picture.php?albumid=457&pictureid=5578
http://www.600cc.org/forum/picture.php?albumid=457&pictureid=5579
warning pictures are huge!
BoneJj
Well-Known Member
Nice, this is why my next vehicle will just be another truck...
I'm going to wait a while though, the new diesel Colorados will not be out until 2015 and I wont get one until the 2nd or 3rd year of production here in the US as they are being produced in Europe right now.
My WRX is no good for trailer use with the turbo... I would not want to stay in boost for extended periods of time hauling something. Nice sure fire way to burn up my turbo and oil....
