Thanks. I have the mechanical skill set. Would you mind sending me the cam map just so I have it? I can message you my e-mail...If you're somewhat mechanically inclined ,as you seem to be it's not overly difficult. I didn't have to degree my cams since I bought them second hand from Marthy so they were machined and ready to install. Use green loctite when reinstalling cam gear bolts. Trust me on this. I didn't loctite mine and bolts backed out and destroyed part of my head. Bought a new (used with less miles) head and reinstalled cams. Could have been much worse. Got the head cheap too. Only power mod I didn't do is the trigger mod and fz6 intake runner's. That's an easy mod since there's not as much to take off. I learned lots about bike mechanics doing 100 percent of my bike work myself. Need a dyno tune too. I have a decent FZ6 cam map for pc5 though. If you need any pointers myself or Marthy himself could help you out.
Sent from my SM-G950U using Tapatalk