Looks sick!!
Black on black.
Thanks, yeah I noticed it wouldn't be level so I grinded each tab of the h4 ring so I could rotate it around more and then silicone d it in place. Its not perfect and is still slightly higher on the left side when sitting on the bike but its pretty close. Yeah I just couldn't resist painting it orange, I really wanted some color in there to make it pop a little. It actually looks pretty good in person and ties in the orange wheel stripes and levers. And the reddish copper paint in some lights has a strong orange undertone and in that setting it looks really good.Yeah man!! Looks good. I think it brings some nice contrast to your bike. It does match your levers. Yeah, if you didn't use the silicone washer, it would set the whole assembly down into the reflector. I didn't have to trim anything with the shroud. The only issue that I think most of us had was with the alignment ring. You can't use it the way that it was made, you have to trim the tab on the inside and align it by eye. I definitely think it was one of the best mods that I ever did.
Looks nice man! Can't beat all black!
Black on black.
They do. I bought it but never put it in because it clashed with the blackness.Looks awesome, bobby bo bonsin and applejax!
bobby bo bonsin, was it difficult to get rid of the burn spots on the inside of the lamp? You also already had an HID on your ride, did you just buy part of the retrofit kit, or an entire set that included HID bulb and balast?
Does anyone know if they have angel-eye options for the retrofit?
There is a thread on this forum(EDIT) my bad, I thought I was on another site... lol, about how to make something similar, it was quite cool and simple.... Worth checking out.Would I be able to buy something like this from them? If not, where could I get something like it? Love the look of the LED headlights. It would look sharp on the front of my bike.
Thanks alot. No the burn spots almost just wiped off with a rag.I used a little headlight restore (mothers) on a microfiber towel and buffed it off then wiped inside of headlight with a little rubbing alcohol to remove any streaks.came off really easy. Oh and I just ordered the whole kit and installed it.Looks awesome, bobby bo bonsin and applejax!
bobby bo bonsin, was it difficult to get rid of the burn spots on the inside of the lamp? You also already had an HID on your ride, did you just buy part of the retrofit kit, or an entire set that included HID bulb and balast?
Does anyone know if they have angel-eye options for the retrofit?
Nice. How about the retrofit kit? Did you buy the whole set or just partial and reused your existing parts?Thanks alot. No the burn spots almost just wiped off with a rag.I used a little headlight restore (mothers) on a microfiber towel and buffed it off then wiped inside of headlight with a little rubbing alcohol to remove any streaks.came off really easy.
I just ordered the whole thing and replaced everything.Nice. How about the retrofit kit? Did you buy the whole set or just partial and reused your existing parts?
It really isn't that hard. Perhaps attempt it yourself...So is anyone offering this service yet? I'm in AZ and haven't met any other fz6r riders out here...
Trust me this was my first try on a bike and as long as you TAKE YOUR TIME AND FOLLOW MY WRITE UP....you will be fine...also ask ask ask and ask if you are unsure about somethingIt really isn't that hard. Perhaps attempt it yourself...
Sent from my SPH-M930 using Tapatalk 2
You heat up the headlight, put projector in, reseal, and profit !So is anyone offering this service yet? I'm in AZ and haven't met any other fz6r riders out here...