Id like to share my Mod. For anyone that likes listing to some music on a long ride without having ear phones in you ear or wires hanging out. It is also a pain to change songs or volume. so i thought there has to be a better way and there is.
This is a very cheap option. the great thing about this is you can Pause/Play music. change songs back/forward and even Volume up/down from you helmet with out messing around. you can even turn it off and on without touching your phone or ipod so you can leave it in your pocket or bag. so long as the ipod/phone is in range it will auto sync when is turned on. its also rechargeable and easy to remove but stays on at high speed. and it cost about $15 - $20 to setup.
Ok so the idea is simple. the Bluetooth receiver is velco to side of the helmet. and you have padded helmet speakers installed inside the helmet and you connect the 3.5mm audio cable to the Bluetooth Receiver and connect your phone or ipod to Bluetooth.
What you will need is a little Bluetooth receiver about $10. some double sided Stick on Velcro $1 and some padded Helmet speakers $5 an ipod or phone with Bluetooth. electrical tape and cable ties $3. please see below.
install the helmet speakers there padded and come with velcro there easy to install in a Shoei they just stick in. on my old shark it was harder and i had to tuck it under the internal padding.
if your good at cutting and soldering then id shorten the cable. if your not very good like me then you can tie it up and use cable ties to make a tight package and then put electrical tape over it to neaten it up. i then used some of the double sided sick on velcro to tuck it in place. on the back of the helmet see pictures below.
then you need to put some of the double sided velcro on the Bluetooth receiver and put it in place and connect you speaker cable. and you done. then you need to Bluetooth it to your ipod/phone.
Bluetooth Unit.
eBay Australia: Buy new & used fashion, electronics & home d
and
Helmet speaker Pads.
eBay Australia: Buy new & used fashion, electronics & home d
Any questions please ask
This is a very cheap option. the great thing about this is you can Pause/Play music. change songs back/forward and even Volume up/down from you helmet with out messing around. you can even turn it off and on without touching your phone or ipod so you can leave it in your pocket or bag. so long as the ipod/phone is in range it will auto sync when is turned on. its also rechargeable and easy to remove but stays on at high speed. and it cost about $15 - $20 to setup.
Ok so the idea is simple. the Bluetooth receiver is velco to side of the helmet. and you have padded helmet speakers installed inside the helmet and you connect the 3.5mm audio cable to the Bluetooth Receiver and connect your phone or ipod to Bluetooth.
What you will need is a little Bluetooth receiver about $10. some double sided Stick on Velcro $1 and some padded Helmet speakers $5 an ipod or phone with Bluetooth. electrical tape and cable ties $3. please see below.
install the helmet speakers there padded and come with velcro there easy to install in a Shoei they just stick in. on my old shark it was harder and i had to tuck it under the internal padding.
if your good at cutting and soldering then id shorten the cable. if your not very good like me then you can tie it up and use cable ties to make a tight package and then put electrical tape over it to neaten it up. i then used some of the double sided sick on velcro to tuck it in place. on the back of the helmet see pictures below.
then you need to put some of the double sided velcro on the Bluetooth receiver and put it in place and connect you speaker cable. and you done. then you need to Bluetooth it to your ipod/phone.
Bluetooth Unit.
eBay Australia: Buy new & used fashion, electronics & home d
and
Helmet speaker Pads.
eBay Australia: Buy new & used fashion, electronics & home d
Any questions please ask