• Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.

Search results

  1. Half-Click Up

    Do i need new chain?

    I went straight from 16/46 to 15/49. The difference in acceleration is as dramatic as you'd expect. 120 link chain will work for the 50T rear, yep.
  2. Half-Click Up

    Xj-6 Diversion seat fit the Fz6r?

    Wouldn't make sense to try and pass off a fake since the demand would be just as high for a reproduction. People would pay the OEM GYTR price just to finally get their hands on one. I'd say you just picked up the rarest Fizzer part on the planet. Congrats!!
  3. Half-Click Up

    Do i need new chain?

    I originally wanted to go 50 in the rear, but couldn't locate a 50 tooth sprocket at the time. I went 15/49 with a 120 link chain and have been running that on the track for quite some time. Top speed is 117.
  4. Half-Click Up

    Sprocket change help pls

    I run -1/+3 (15/49) with a 120 link chain. Perfect on the track.
  5. Half-Click Up

    Xj-6 Diversion seat fit the Fz6r?

    UNICORN
  6. Half-Click Up

    R6 rearsets on my FZ6R

    No I've never installed a gear shift indicator. In fact, I'm not entirely sure what system one of those piggy-backs off of in order to work.. ? If it piggy-backs off the ECU, then I'm not sure how a fuel controller would mesh into the installation of one..
  7. Half-Click Up

    Which way does the front sprocket go?

    I run Vortex sprockets, offset faces out, away from the engine.
  8. Half-Click Up

    R6 rearsets on my FZ6R

    REAL clean. :cool:
  9. Half-Click Up

    Clutch Recommendations

    Barnett Performance clutches are both street and track friendly.
  10. Half-Click Up

    Gytr parts?

    All that's left out there is "new-old stock" that you'll come across on eBay by chance. Go with HiFlo Filtro for both air and oil and never look back.
  11. Half-Click Up

    Slip on with R6 Headers

    I've run the R6 header for several years now. Started out with a Yoshi R-77 slip-on and now I run the Radiant Cycles Shorty GP (basically straight pipe). The most important thing is that you get a proper measurement of the end of your header. If I recall, my particular R6 header has a 1 and...
  12. Half-Click Up

    Code 12.

    The important thing is that you discovered the issue, fixed the problem, and shared the solution. It's all about learning from each other. Glad you're back up and running!
  13. Half-Click Up

    Timing Wheel Bolt.

    Correct... roughly 26 ft. lbs. on your torque wrench.
  14. Half-Click Up

    Smallest and sportiest windscreen for this bike please help.

    First I've seen of this "Fabbri" screen. I must say it looks pretty fantastic.. very similar in design to the original GYTR option that has gone the way of the rear cowl cover.
  15. Half-Click Up

    Question Does the R6 quick shifter work on the FZ6R

    To further enhance joshy.exe's question... Suppose you've installed R6 rearsets on your Fizzer. Would you want an R6 quick shifter setup, or a Fizzer quick shifter setup? Asking for a friend ;)
  16. Half-Click Up

    Help 2013 code 12

    Code 12 refers to the crank position sensor. Not sure if it has a fuse. I'd start there.
  17. Half-Click Up

    R6 Rear-Sets Conversion Tutorial

    Yes Sir that was quickly addressed within a few days of completing this project when a subscriber pointed out the same observation. ;)
  18. Half-Click Up

    Question M4 Canister exhaust

    Swap out for a Radiant Cycles ShortyGP slip-on. 😈
  19. Half-Click Up

    R6 Rear-Sets Conversion Tutorial

    They are higher and further back. Tightened up the "rider's triangle" quite a bit and provides for much more lean angle. Peg height mimics the R6, but actual seating height per the Fizzer's design puts it more similar to the GSXR 600 in feel. I'm liking it so far, but the real test will be on...
  20. Half-Click Up

    R6 Rear-Sets Conversion Tutorial

    Hey thanks brotha! :cool:
Back
Top