In the next week I'm going to hook a mic up to my Gopro and try to get a better video but I figured I'd let you guys finally hear it.
https://vimeo.com/65204749
https://vimeo.com/65204749
Stock header for now, I have r6 headers but might go a different route.I WANT! man did you cut the stock headers or did you use the R6S headers?
Let me know how that goes, i'd like to compare your EJK maps to the one I made with my spidey senses lol.Look and sound very good, good job!
Two things...
Make sure the can doesn't touch the ground when you lean... peg first.
What map are you using... if any? If you can't afford a PCV for now use a DBKiller. Not because your bike doesn't blow up that it run right.
In discussion with EFI - Electronic Fuel Injection Controllers - ATVs, UTVs, Motorcycles, Snowmobiles, Scooters, Sport Bikes, Watercraft to load my map int there fuel controller. Should be just as good and a bit cheaper compare to PCV option.
Yeah I did, It looks brown in the lighting but in the sun the pearl comes out and it looks more red. Thanks!Whoa, did you plasti dip your bike? I actually kind of like the color.
I've tilted the bike over with a buddy checking the exhaust clearance and it clears, Thanks for looking out Marthy.Look and sound very good, good job!
Two things...
Make sure the can doesn't touch the ground when you lean... peg first.
What map are you using... if any? If you can't afford a PCV for now use a DBKiller. Not because your bike doesn't blow up that it run right.
In discussion with EFI - Electronic Fuel Injection Controllers - ATVs, UTVs, Motorcycles, Snowmobiles, Scooters, Sport Bikes, Watercraft to load my map int there fuel controller. Should be just as good and a bit cheaper compare to PCV option.
I'll let you read between the lines... $0.00000 mod. File the thing 0.020" to turn the wheel CW (advance). It's a 20 minutes job on the FZ6R... but don't do it without the proper tuning.I've tilted the bike over with a buddy checking the exhaust clearance and it clears, Thanks for looking out Marthy.
Right now I'm using a Two Brothers Pvc but I want to switch to the Power Commander 5. I am holding off because I'm looking into getting the new Power commander with Ignition control but unfortunately it's not made for our bike so I need to see if a shop can incorporate it in somehow.
Thanks for the info, I might have to go this route and as always I never make any kind of adjustment unless my bike is on the dyno.I'll let you read between the lines... $0.00000 mod. File the thing 0.020" to turn the wheel CW (advance). It's a 20 minutes job on the FZ6R... but don't do it without the proper tuning.
Holeshot Performance Products, Inc.
Nice job, looks good, as long as you keep exhaust in the general area of the stock one you shouldn't have any problems with it dragging in corners.In the next week I'm going to hook a mic up to my Gopro and try to get a better video but I figured I'd let you guys finally hear it.
https://vimeo.com/65204749
Please keep me updated on what you find out with the flashing, Thanks!Nice job, looks good, as long as you keep exhaust in the general area of the stock one you shouldn't have any problems with it dragging in corners.
I posted about ECU flashing and have contacted the guys to see if they can do our rides.
ECU flashing the way to go.
I'm running a Base map right now from Dyno Jet as I didn't save my original tune also the bike was about 145 so I'm sure that didn't help. When I had it on the dyno we found that it ran extremely rich with most base maps at this altitude. I'll be getting my bike back in the shop as soon as a do a few more things.Just curious. Is the bike not warmed up in the video, or are you still tuning the ECU maps? It sounds like you've got quite a "stutter" when accelerating.
Nice man! I was actually thinking of going with yoshi since I did a costume exhaust install as well, but ultimately ended up going witha ninja 650 can.In the next week I'm going to hook a mic up to my Gopro and try to get a better video but I figured I'd let you guys finally hear it.
https://vimeo.com/65204749