First set of mods are on the way!!

[SDrizzy]

Hi everyone,

I joined this site a couple years back to see what the most common mods were and to look up how to's for some common problems with the FZ6R and let me just say that this site is by far the best for that and more! With that said, I have no idea why it has taken me so long to finally post or even buy anything for my blue stock 09.

I have been riding for a couple years now on the completely stock bike and just recently bough no cut sliders and a double bubble wind shield. Those should be coming soon and I can't wait to install them.

My real question follows... I have been looking into a fender eliminator but I can't find any regulations state to state on the legality of hardware (specifically for MA, I may just end up going to the local PD and just ask).. I know that the most common dilemmas are the lighting and how low/visibility of the plates. I was just wondering if anyone can point me in the right direction for more trusted brand. I know that werkes is a well known one but i found a DMP that looks better IMO..

Surfside Moto: DMP 2009-2013 Yamaha FZ6R Fender Eliminator Kit

My concerns are that there is no light above it and since it does not come with blinkers, can i just mount my stocks or do I need to order completely different ones?

I'm terribly sorry about the novel above... but any suggestions or opinions would be greatly appreciated!!

 

[JT]

Hi everyone,

I joined this site a couple years back to see what the most common mods were and to look up how to's for some common problems with the FZ6R and let me just say that this site is by far the best for that and more! With that said, I have no idea why it has taken me so long to finally post or even buy anything for my blue stock 09.

I have been riding for a couple years now on the completely stock bike and just recently bough no cut sliders and a double bubble wind shield. Those should be coming soon and I can't wait to install them.

My real question follows... I have been looking into a fender eliminator but I can't find any regulations state to state on the legality of hardware (specifically for MA, I may just end up going to the local PD and just ask).. I know that the most common dilemmas are the lighting and how low/visibility of the plates. I was just wondering if anyone can point me in the right direction for more trusted brand. I know that werkes is a well known one but i found a DMP that looks better IMO..

Surfside Moto: DMP 2009-2013 Yamaha FZ6R Fender Eliminator Kit

My concerns are that there is no light above it and since it does not come with blinkers, can i just mount my stocks or do I need to order completely different ones?

I'm terribly sorry about the novel above... but any suggestions or opinions would be greatly appreciated!!

two things
1 - make sure you have blinkers once FE is installed
2- make sure the plate is visable and has a light to it at night.

I would recommend the motodynamics tail light. it has white LED's below it along with integrated blinkers. although most laws state the blinkers need to be at least 9" from the brake light so additional blinkers and you should be set

 

[Kayo7]

I use the Competition Werkes FE kit. Came with a license plate light, turn signals, and license plate bracket. I haven't gotten into any trouble with it and I love the look.

 

[06330i]

This is the route I went: 2009 2010 2011 FZ6R FZ 6R Black Fender Eliminator | eBay

I've used that guy for my yamaha and my current ninja. Both really solid products. He also offers packages that include a plate light and aftermarket signals.

 

[leem00]

Hi everyone,

I joined this site a couple years back to see what the most common mods were and to look up how to's for some common problems with the FZ6R and let me just say that this site is by far the best for that and more! With that said, I have no idea why it has taken me so long to finally post or even buy anything for my blue stock 09.

I have been riding for a couple years now on the completely stock bike and just recently bough no cut sliders and a double bubble wind shield. Those should be coming soon and I can't wait to install them.

My real question follows... I have been looking into a fender eliminator but I can't find any regulations state to state on the legality of hardware (specifically for MA, I may just end up going to the local PD and just ask).. I know that the most common dilemmas are the lighting and how low/visibility of the plates. I was just wondering if anyone can point me in the right direction for more trusted brand. I know that werkes is a well known one but i found a DMP that looks better IMO..

My concerns are that there is no light above it and since it does not come with blinkers, can i just mount my stocks or do I need to order completely different ones?

I'm terribly sorry about the novel above... but any suggestions or opinions would be greatly appreciated!!

I have the DMP and love it...I bought some cheap led arrows for turnsignals to mount to it...I didn't want to keep the stockers...I think they are ugly! I also bought two small red led license plate bolt/lights that had white led lights in the for the plate.

seen here...
[ame=http://www.amazon.com/gp/product/B0041QGSF0/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1]Custom Dynamics LED License Plate Tag Bolts with White LEDs and Red Turn/Brake or Turn/Running LEDs Black TB03B : Amazon.com : Automotive[/ame]

Note I had issues with the DMP and the Givi luggage racks....well documented in other threads.

I have also added the motodynamic tail light....I love that!

 

[Scott_Thomas]

I have comp werkes fe and love it. The bike shop where I was inspected (victory dealer) loved the FE.

Sent from my SGH-I777 using Tapatalk 2

 

[lwclancers]

I absolutely recommend this ebay seller too. He has multiple color options, and kits with signals and plate light included. Really good price point compared to others and its great quality!

This is the route I went: 2009 2010 2011 FZ6R FZ 6R Black Fender Eliminator | eBay

I've used that guy for my yamaha and my current ninja. Both really solid products. He also offers packages that include a plate light and aftermarket signals.

 

[Chucker]

The R&G Tidy Tail extends the plate out under the tail light and has a plate light. I believe it is designed that way to ensure no issues.

 

[JT]

The R&G Tidy Tail extends the plate out under the tail light and has a plate light. I believe it is designed that way to ensure no issues.

that looks like a sweet FE

 

[Scott_Thomas]

The R&G Tidy Tail extends the plate out under the tail light and has a plate light. I believe it is designed that way to ensure no issues.

I like that fe. Will also keep you from smashing the plate when hitting bumps. Hasn't been a problem for me but others have had problems.

Sent from my SGH-I777 using Tapatalk 2

 

[SDrizzy]

Thanks for all the help everyone. I think once my windshield and sliders come in all order the R&G one. I like how it flows with the bike the best. I'll keep y'all posted!