Hello everyone, i'm having some problems to start the bike after i installed fuel controllers... First i bought Wiseco FI controller, and the bike had this problem... Now i bought a power commander V and the problem is happening again... When cold, the bike starts immediately everytime, but after i ride it for sometime (Lets say, more than 10 minutes), when the bike gets hot, if i turn off the bike, often i have problems to restart it... When this happens i let it cool for while, resting a couple minutes, then it is good to go again... I have researched on the internet trying to figure out... One thing that i came across was "vapor lock"... Inputs will be appreciated... Hmm, the coolant temparature seems normal:
On heavy traffic: 98ºC (208ºF) to 100ºC (212ºF)
Cruising: Aprox. 90ºC (190ºF)
When i turn off the bike after a strong ride and watch the max temp it goes:
110ºC (230ºC)
On heavy traffic: 98ºC (208ºF) to 100ºC (212ºF)
Cruising: Aprox. 90ºC (190ºF)
When i turn off the bike after a strong ride and watch the max temp it goes:
110ºC (230ºC)