GYTR shorty exhaust mod


M

mdgreene2001

New Member
This is how I did it pictures and videos, with power commander 5 and auto tune.










<iframe src="https://www.facebook.com/video/embed?video_id=10151533352664366" width="544" height="960" frameborder="0"></iframe>

<iframe src="https://www.facebook.com/video/embed?video_id=10151533354064366" width="544" height="960" frameborder="0"></iframe>
 
2

2013 Fz6r satin

New Member
I was wondering if I could change my own oil/filter...would never dream about tackling what you did...great job,congrats!!
 
Last edited:
Rich007

Rich007

New Member
This thread is a total fail, all I see is one picture. Everything else is dead links.
 
M

MiniMose

New Member
i want to revive this...

I had thought about doing this and ws talking it over with a friend and then i saw your post.

i am curious on how it was mounted, and what you used as an adapter


please fix the links and pics
 
I

Ivan_13

New Member
This is exactly what I want to do with my 6r, but with a TBR slip on.. I'd like to talk about it with someone who has actually done it, before I tackle it blindly though..
 
M

Marthy

World Most Bad A$$ 6R
Elite Member
Ivan_13 said:
This is exactly what I want to do with my 6r, but with a TBR slip on.. I'd like to talk about it with someone who has actually done it, before I tackle it blindly though..
Click to expand...
The TB fit on the headers with a special adapter, not the usual exhaust clamp or springs that most use. I did one for a FZ8...
 
I

Ivan_13

New Member
Marthy said:
The TB fit on the headers with a special adapter, not the usual exhaust clamp or springs that most use. I did one for a FZ8...
Click to expand...
Hmm... I'm interested. Very interested.
I was thinking about doing the whole r6 headers mod for a slip on. If I knew more about welding and all that, then I would've done this a loooong time ago..
I'm just trying to take the most inexpensive route possible.
 

M

Marthy

World Most Bad A$$ 6R
Elite Member
The R6 headers is by far the cheapest way to go out of pocket. But if you count your time... its a b*&^!!!! LOL By the time you bend the headers down to clear the oil pan the pipe aim to low... just doesn't fit as nice IMO. The first exhaust I did was the R6. I end up spending 3 hrs bending it down then spend $$$ to redo 1/2 of it to make it look right. Modding the 6R exhaust took 1/2 the time and cost 1/2 the $$$.
 
You must log in or register to reply here.


Top