I will probably do these soon... I also want to integrate 2 RED LED strips to my brake light.... also two LED strips along the side into the turn signals
-
Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.
Flush mount DIY + turn signals in air scoop
- Thread starter travisH3
- Start date
- Thread starter
- #22
travisH3
New Member
On my ninja 250 I had a red led light bar across the top of my fender eliminator that was a tail and stop light and super bright. I kept it because it was expensive but the led tail light I already have is plenty bright haha
applejax
New Member
looks nice!
Its just too bad that the headlight drowns out most of the air dam blinker. But some safety is better than zero!
Its just too bad that the headlight drowns out most of the air dam blinker. But some safety is better than zero!
- Thread starter
- #24
travisH3
New Member
I plan on getting a projector installed by winter which should fix the issue. But for now it works and gets rid of the big stock ones. I was really trying to figure out something with the mirror before I bought everything to do this, but couldn't find anyway to do it so it still looked clean. I will keep thinking about it. I'm putting my engineering degree to good use lol. I will post more pics if I change anything. I'm definitely gonna look into the gsxr mirrors, I may find a used one someone is selling cheap that is just one side, and use it to test fit before taking the big dive.
W0rp3D
New Member
Any chance you still have a link to the ebay seller you got these off, i cant seem to find any that are E marked and over here in Australia there not legal unless there E marked so i would prefer to get the ones you have if i can.
Also any idea how easy/hard it would be to mount a second set of flush mounts in the scoops?
Also any idea how easy/hard it would be to mount a second set of flush mounts in the scoops?
Idiosynocracy
New Member
Have you had any problems with your Fuses blowing out? After what just happened to me I fear the worst! lol
Nope. You probably have a bad LED strip lmfao
Sent from my one and only iPhone 5 using Tapa 2 da talk
Sent from my one and only iPhone 5 using Tapa 2 da talk
Idiosynocracy
New Member
Yeah it turns out I did. Ended up getting refunded and bought new strips for my bike.
W0rp3D
New Member
Found some, here in australia (and europe too i assume) for them to be road legal the lens's need to have an E in a circle stamped on them, i believe it is euro standards compliant, most of the ones on ebay dont have it as i assume no markings are needed in the US and canada.
If you look at the first pic the top right hand corner of the packaging says E marked.
Last edited:
manel
New Member
2 Motorcycle Amber 15 LED Turn Signal Light Bulb Indicator 12V | eBay
they do not say but this are E marked
they do not say but this are E marked
- Thread starter
- #32
travisH3
New Member
2 Motorcycle Amber 15 LED Turn Signal Light Bulb Indicator 12V | eBay
they do not say but this are E marked
those are the same ones I installed
xleeb0y13x
New Member
Looks really good. I drive a rig at night and see a lot of bikes that could use something like this.
Bump. .
Jt did you ever do this? Would you think yellow or Orange would be better?
http://www.motorcycleledlights.com/Yellow-Motorcycle-LED-Lights.aspx
http://www.motorcycleledlights.com/Orange-Motorcycle-LED-Lights.aspx
Last edited:
Rabbit... Do you think yellow or Orange led would be better for this?
http://www.motorcycleledlights.com/Yellow-Motorcycle-LED-Lights.aspx
http://www.motorcycleledlights.com/Orange-Motorcycle-LED-Lights.aspx
I think that I would go for the Orange. Either way, that would look cool
Sent from my Galaxy Note II with Tapatalk 2
I have something similar in mine because inspector didn't like front visibility of my flushies and I hated the zx6r with signal mirrors I used for inspection. I used bright white, but am thinking of throwing some amber ones in there. Not sure if inspector will like the bright whites. Mine have 9 leds and are perfect for the scoops. Hot mine on ebay or Amazon cheap as $hit.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I did not do a kit a piece milled cheap LED strips wish I would have done the kit its worth it. and between those I think orange would be better
Thanks JT, Scott, & Rebbitman....
I need to look at the bike a little closer this weekend to decide what size to go with front and rear...plus the million collor accents I am going to throw at it too.
I need to look at the bike a little closer this weekend to decide what size to go with front and rear...plus the million collor accents I am going to throw at it too.