as the title says, i had a problem with my bike (2009 fz6r, 14k kms) with the clutch being stuck and just tsalling out everytime im in gear and not shifting at all when i jump start it in 1st. today i opened up the clutch housing, took out all the clutch plates, cleaned them, let them soak in oil for an hour then re-assembled. i started the bike, let it warm up for 10 minutes, pulled in the clutch, and popped it into 1st with no stalling at all. i go to ride it out onto the street and it doesnt do anything. i completely let go of the clutch and the bike is just idiling in first. so i pop it into 2nd, then 3rd, then 4th, then 5th, and finally in 6th and same result, it just idles. I rode the bike earlier in the week when i popped it into 1st and rode it down my street. I put all the pressure and friction plates in the exact order so im lost and need some help. thank you in advance.