Dropping the forks for clip ons, will the stock kickstand work?

[Euroklydon]

I have my bike at the dealer for a couple of things and I asked if they could lower the forks for me because I don't feel comfortable doing it myself.
Getting the woodcraft clipons 1 1/2 inch risers.
He mentioned dropping it that much may have kickstand problems.

I know quite a few of you have done this and wondering if I have anything to worry about.

 

[derf1278]

I have the woodcraft clipons with the front lowered 1.5". No problems with kickstand, the bike does stand a little more straight up when parked. I just make sure to lock the forks when I park it.

 

[Euroklydon]

I have the woodcraft clipons with the front lowered 1.5". No problems with kickstand, the bike does stand a little more straight up when parked. I just make sure to lock the forks when I park it.

Always do, thanks!

 

[MistahT]

I did not trust the stock kickstand after dropping the front, especially on uneven ground. I got a lowered kickstand. Yeah the bike is a little far over in my opinion since the rear is stock height, but no wind is going to blow it over for sure!

 

[Scott_Thomas]

I have the woodcraft clipons with the front lowered 1.5". No problems with kickstand, the bike does stand a little more straight up when parked. I just make sure to lock the forks when I park it.

Same here, I thought about lowering my kick stand, but have had it this way for 2 or 3 years now with no problems. So I'm leaving it as is.

Sent from my SAMSUNG-SM-G930A using Tapatalk