Clip On Clearance Issue

[droppedbike]

So I recently lowered the front end 1.5" and installed some woodcraft Clip ons with the 1.5" risers. I love the way the bike rides now but am no longer able to make sharp turns when I'm walking the bike. When I turn left the brake lever hits the front fairing and when I turn right it's even worse on the clutch due to the clutch lever being after market. When I park the bike I can't turn the front wheel all the way to the left so I can't lock the front forks with the key. Any body else have this issue?

 

[TexanFZ6R]

I have my aftermarket brake lever tilted just high enough to clear the fairing. My aftermarket clutch lever does hit the fairing though

 

[Scott_Thomas]

Extend the bars further out so that the the tip of the bar (opposite the grips) in almost flush with the clamp and rotate the controls. I managed to find a location that cleared the tank and fairing (I also have woodcraft 1.5" risers and bike lowered around 1.75". With the bars in that far you'll never clear the fairing.