exhaust

Hey, I have a 2010 fz6r that has a one-piece stock exhaust system. Bike is bone stock, with no mods So I was thinking of having a workshop cut my exhaust straight after my o2 oxygen sensor, and have them weld a pipe and add a SC-Project Slip-On Exhaust at the end. Would I need to tune my bike...

Will a 06 r6s header fit? I just ordered one ik everyone uses the 99 to 05 but I thought it was the same.

Howdy y’all, It’s been almost a full year since I bought my 09 FZ6R, and I was just curious to know what should I do for an exhaust. I read the other threads and saw that I have to get an air box mod & power command for the full exhaust. Would I still have to get all of that for a exhaust slip...

Hey guys, I recently made an exhaust for my 2009 FZ6R and and the issue that I’m having is that at low rpms the idle keeps jumping sometimes it goes so low that it turns my bike off. Sometimes I can’t even turn my bike on because of this. I’ll leave a vido here so you guys can see what is going...

I'm running a full Black Widow exhaust (200mm silencer with baffle installed) and K&N filter on my 09 FZ6R. Waiting for my Power Commander V to come in, and in the meantime I'm trying to find out which map offered would suit my set up the best since there is no map specific for Black Widow...

SOLD $700 Shipped. In very clean condition, used for around 2k miles (from previous owner). I'm restoring the bike to stock. 630-849-8204. Located in CHICAGO.

Hello 600cc! I just got my FZ6R a few weeks ago. I have done quite a few modifications to it and am fairly pleased with it besides for the exhaust. I don't have 1.2K to drop on an exhaust, so I have been looking into replacing the stock headers with R6 Headers and an R6 slip on. My question...

Hello 600cc! I just got my FZ6R a few weeks ago. I have done quite a few modifications to it and am fairly pleased with it besides for the exhaust. I don't have 1.2K to drop on an exhaust, so I have been looking into replacing the stock headers with R6 Headers and an R6 slip on. My question...

Deleted sold

I haven't had much interest in the bike with the add-ons, so I think I'm gonna pull most of them and throw them up here. I have the following: Motodynamic Integrated Tail Smoke lens - SOLD Motodynamic Flush Front turns - SOLD Roaring Toyz Lowering Link - $30 Modified stock exhaust, would be...

Recently I've been seeing more companies do full exhaust replacements for the fz6r, the cheapest one I've seen is Delkevic They even claim you don't need a PC after installation, but they recommend a dyno test. It seems any major exhaust swap should have a PC and dyno test to make sure you're...

I can't seem to find any information on this, maybe because it's obvious? I have an 01 R6 header and PCV. Does this mean I need to get an R6 slip on? and if so does it have to be for that year?

Does anyone have any experience with cutting off the catalytic converter/muffler (not sure it's exact name..), welding on additional exhaust tubing and then using a slip-on? Can do this please advise any hazards/pitfalls to lookout for.

2013 FZ6R with Two Brothers exhaust and PCIII added. Mapped for TB exhaust and K&N air filter. Cold Starts are a PIA. Runs great when warm. Starts great when warmed up. Without PC, bike starts perfect when cold. Seems to be a chronic problem with Power Commander on various brands of...

Hello, I was looking to mod the stock exhaust like Marthy's exhaust mod. I am a boilermaker by trade so the welding and fabbing will be easy. My questions are what size does the collector have to go down to at the end? Will i need a reducer to allow for slip ons? Thanks for your help!

Has anyone tried this company's exhaust for our bike? I just want to know if it sounds good or not. There's only one video on youtube that shows it off, kinda seem sketchy to me for buying it.

I have r6 headers and shorty exhaust and would like to make a little more flames for the exhaust since I already have the PCV. I am not sure what I have to do in PCV to gain the result so can anyone help me out with a map? Thanks

Hi all, I am trying to see if i mounted my exhaust correctly. Here's a pic: https://s9.postimg.org/hp46shh33/unnamed.jpg And i'm skeptical if there's supposed to be a gap between the engine and the headers like that. Can someone please take a picture of their stock exhaust headers where they...

Selling the full stock exhaust for 2012 FZ6R. Used it for under 50 miles before upgrading to TBR. Well kept and in great/new condition. $200 OBO - PM me with your best offer.

I know of the simple exhaust mods extensilvey covered here,, but saw this and wondered if anyone tried it as it looks like the exhaust mod with a competition werkes muffler added on instead of a 2 1/4" tip. Yamaha 09-Present FZ6R Slip On Exhaust