sprockets and chain

[Fulkon]

If anyone can help I'd appreciate it. I'm doing some research (as always) on sprockets and chain. I'd like to keep the sprockets close to stock maybe slightly better acceleration, 520 chain, and my wife is...big surprise here, wanting to match the new parts to the stock pink tribal design.

Also do you recommend a chain with a master link that clips together or one that gets pressed together?


Any websites or links that have what I'm looking for would be greatly helpful.

I may not show up very often on posts or threads but just wanna say this forum has helped tons and provided alot of good information.

Keep on keeping on and keep the rubber side down.

 

[Marthy]

If anyone can help I'd appreciate it. I'm doing some research (as always) on sprockets and chain. I'd like to keep the sprockets close to stock maybe slightly better acceleration, 520 chain, and my wife is...big surprise here, wanting to match the new parts to the stock pink tribal design.

Also do you recommend a chain with a master link that clips together or one that gets pressed together?


Any websites or links that have what I'm looking for would be greatly helpful.

I may not show up very often on posts or threads but just wanna say this forum has helped tons and provided alot of good information.

Keep on keeping on and keep the rubber side down.

- Home - Indysuperbikes look at Vortex chain. Good selection of colors. Same for sprockets. Some of those link doesn't come in colors... The rivet link is better... but I've been using the clip on style with no issue. Just need to be careful when you clean the chain...

 

[Deanohh]

I've never seen an issue with a clip style link, but that doesn't mean there never has been any problem. But I have seen guys safety wire or zip tie around the outer plate and clip, as a precaution.

 

[SAFE-T]

I've had a clip come off a chain. Didn't cause a crash but I replaced it with a riveted link.

 

[Midnightroadie04]

If anyone can help I'd appreciate it. I'm doing some research (as always) on sprockets and chain. I'd like to keep the sprockets close to stock maybe slightly better acceleration, 520 chain, and my wife is...big surprise here, wanting to match the new parts to the stock pink tribal design.

Also do you recommend a chain with a master link that clips together or one that gets pressed together?


Any websites or links that have what I'm looking for would be greatly helpful.

I may not show up very often on posts or threads but just wanna say this forum has helped tons and provided alot of good information.

Keep on keeping on and keep the rubber side down.

I have an EK pink chain on my 09. If you want a decent deal you can get the chain and sprockets pretty reasonable. I'll have to research where I got mine and let you know. I have a 44 Thrust brand rear sprocket with about 500 miles on it if you are interested.

 

[Fulkon]

I would be interested but my wife insists that I should get a rear sprocket that matches my paint scheme (I'm not complaining hehe) But thanks for the offer. I'm thinking of going with this setup, let me know what you think.

Driven 2009-2011 Yamaha FZ6R 520 Conversion Power Up Kit