• Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.

Decent FE kit?

They are top quality. See mine:

11338d1340795443-rabbitmans-mod-central-uploadfromtaptalk1340795434172.jpg


11337d1340795420-rabbitmans-mod-central-uploadfromtaptalk1340795415484.jpg


I don't have those fugly signals anymore, but you get the idea.
 
I bought this cheap one and am using the motodynamics integrated tail lite.

[ame="http://www.amazon.com/Yamaha-2008-2013-Eliminator-License-Bracket/dp/B00B9HBGV0/ref=sr_1_1?ie=UTF8&qid=1373630634&sr=8-1&keywords=fz6r+fender+eliminator"]Amazon.com: Yamaha 2008-2013 FZ6R Fender Eliminator License Plate Bracket: Automotive[/ame]
 
Granted the dmp fe is 50$ but I was surprised at how solid the part was. Very good fitment and the angle the plate works perfect with the Motodynamics taillight. I think it was worth the price.



Sent using Jedi mind tricks!
 
Last edited:
I just got my DMP FE waiting for my Motodynamics tail light - my after thought now will i be able to pass NYS inspection :( ? If not can i still install some tail light signals along with my moto integrated light?? :confused::confused:
 
Here in PA I think the law is the turn signals have to be 6 or 7 inches apart. I haven't had any problems with failing inspection with my integrated tail, so I don't really think people care to much. But yes you can. Unplug the turn signals from the tail, and plug the stock ones bck in then zip tie them on each side of the grab bar. Easy way to get by inspection.
 
Neme said:
Here in PA I think the law is the turn signals have to be 6 or 7 inches apart. I haven't had any problems with failing inspection with my integrated tail, so I don't really think people care to much. But yes you can. Unplug the turn signals from the tail, and plug the stock ones bck in then zip tie them on each side of the grab bar. Easy way to get by inspection.
Click to expand...


Agreed, it varies depending on where you go. The shop I go to said they had to be 6 inches apart. May get an integrated and slap the led rears on for inspections or run both.
 
Scott_Thomas said:
Agreed, it varies depending on where you go. The shop I go to said they had to be 6 inches apart. May get an integrated and slap the led rears on for inspections or run both.
Click to expand...

The LED turn signals on the under tail are neat but I don't know how that'd look with a sequential tail light. Might look tacky but you never know.

By the way, how you liking your bars man?
 
Neme said:
The LED turn signals on the under tail are neat but I don't know how that'd look with a sequential tail light. Might look tacky but you never know.

By the way, how you liking your bars man?
Click to expand...


Haven't had her out yet. I finished at around 10:30 last night and went to bed around 1am and went to work at 6am until 3pm. Neighbor was having a party so I was over there most of the night. Hopeful to get out tomorrow. I wanna get plugs at Lowe's or somewhere to cover the holes from the stock risers. Someone else had some and got them from a hardware store and it makes it look much better. I love the look and feel of the clipons with the new grips and bar ends. If I get a sequential tail I will probably take the other leds off until inspection.
 
Scott_Thomas said:
Haven't had her out yet. I finished at around 10:30 last night and went to bed around 1am and went to work at 6am until 3pm. Neighbor was having a party so I was over there most of the night. Hopeful to get out tomorrow. I wanna get plugs at Lowe's or somewhere to cover the holes from the stock risers. Someone else had some and got them from a hardware store and it makes it look much better. I love the look and feel of the clipons with the new grips and bar ends. If I get a sequential tail I will probably take the other leds off until inspection.
Click to expand...

You must be dying to ride her. Hopefully tomorrow turns out to be nice so you can go on a nice little cruise. Yeah, those plugs complete the project.
 
Neme said:
You must be dying to ride her. Hopefully tomorrow turns out to be nice so you can go on a nice little cruise. Yeah, those plugs complete the project.
Click to expand...

Did you plug yours?
 
Scott_Thomas said:
Did you plug yours?
Click to expand...

No I didn't, I couldn't find plugs that fit in there nicely so I gave up. But it looks much cleaner in the pictures with them plugged
 
Neme said:
No I didn't, I couldn't find plugs that fit in there nicely so I gave up. But it looks much cleaner in the pictures with them plugged
Click to expand...


If I find some cheap that work I'll let you know or just pick up some extras. Wish I had gone out for a ride tonight. I keep going and sitting on her in the garage. I wanna ride so bad. Gonna take her to work Monday. I think it's supposed to be nice.
 
Scott_Thomas said:
If I find some cheap that work I'll let you know or just pick up some extras. Wish I had gone out for a ride tonight. I keep going and sitting on her in the garage. I wanna ride so bad. Gonna take her to work Monday. I think it's supposed to be nice.
Click to expand...

Alright sounds good. Just send me a part number or something if you find some! Yeah Monday should be nice I think. you'll like the change, much "sportier".
 
You must log in or register to reply here.

Similar threads

F
New member from Cincinnati, OH
Replies
1
Views
1K
steelrider
S
J
LED Replacement Bulbs
Replies
7
Views
2K
Jerzee55
J
S
First 2 months of mods...
Replies
4
Views
2K
TexanFZ6R
T
E
FS: Pimp your FZ6R
Replies
3
Views
2K
edk442
E
L
My first problem with my ducati
Replies
12
Views
2K
fazer1
F
Back
Top