agreed, I would not trySimple answer, nope.
no u will not i have done it twice already for a total of 40 mins no dents or indents at all. trust me i had the exh. system off and its made like a tank very heavy. i thought my stock muffler was heavy on my cbrprobably not a good idea~ you will bend something when you lift the bike~ just use stands
You do not need spools for a rear standbetter off getting a center stand or picking up some spools for the swingarm, and buying front and rear stands.
If you really mean the best, I've never heard anyone argue against Pit Bull stands, but a front/rear set will ding you about $280.In your opinion what are the best front/rear stands out there ? What needs to be ordered and from whom?
If you want rear spools, I can give you a link to buy some that use the rear spindle bolt to attach to the bike. This requires no drilling or welding, they are direct replacement. It's what I have on my bike, and they work perfectly.is there a place for rear spools on the FZ6R? I did not see it when I was at the dealership a few days ago?
I almost got those and then realized that they would not work for removing the rear wheel. They are attached to the bracket that is held on by the axle. They will work fine for anything else that you need to lift the bike for just not removal of the rear wheel.If you want rear spools, I can give you a link to buy some that use the rear spindle bolt to attach to the bike. This requires no drilling or welding, they are direct replacement. It's what I have on my bike, and they work perfectly.
Here is the link to the thread where I installed and reviewed them. The link to buy them is there as well. There are also some pics of them installed and being used.
http://www.600cc.org/forum/f89/swingarm-spools-16104/
That is very true, but if you get a stand that can use either spools or lift the swingarm, then it's not such a problem.I almost got those and then realized that they would not work for removing the rear wheel. They are attached to the bracket that is held on by the axle. They will work fine for anything else that you need to lift the bike for just not removal of the rear wheel.
Happy New Year!
Kevin