Turn signal adapter?

[jman]

Does anyone know where I can get a female turn signal adapter. I ordered a turn signal splitter off of ebay which is great but its only a 2 wire not a 3 wire so it kills my running lights. I'd like to put some extra signals in my air ducts. So what I really need is just the small metal piece on the end of the wire that gets inserted into the femal plastic adapter. I found them on one site for like .24 but theres $10 shipping and a $20 min. order. If i can find either the metal piece or a complete female harness with wires that i can just pluck the wires out of that would be great. Any ideas?

Heres the site I need the item at the very bottom.

NT-040

 

[JT]

check these three out

Wire Harness Turn Signal Yamaha R1, R6, R6S, FZ1, FZ6, FZ6R, FZ8 - Motodynamic.com

if not you can also purchase this to bring back your running lights


Blinker Genie Converts 2 Wire LED Blinkers to 3 Wire for Run and Turn Signals | eBay

 

[MNGreg]

check these three out

Wire Harness Turn Signal Yamaha R1, R6, R6S, FZ1, FZ6, FZ6R, FZ8 - Motodynamic.com

if not you can also purchase this to bring back your running lights


Blinker Genie Converts 2 Wire LED Blinkers to 3 Wire for Run and Turn Signals | eBay

Tried to rep this post but wont let me hit you up yet!

 

[JT]

Tried to rep this post but wont let me hit you up yet!

Others can rep me though lol

 

[jman]

Yeah I've seen those adapters. The splitting harness would work I just don't want to spend $20 when all I really need is a $0.25 piece from it. If nothing else though that is my plan b.

 

[JT]

Yeah I've seen those adapters. The splitting harness would work I just don't want to spend $20 when all I really need is a $0.25 piece from it. If nothing else though that is my plan b.

have you considerd the non splicing connectors similar to these http://i.ebayimg.com/t/10-Electrical-Wire-Cable-Snap-Lock-Splice-Connectors-RE-/00/s/NTAwWDUwMA==/$(KGrHqUOKpoE5,)!Hc)wBOiK1+qrng~~60_35.JPG

 

[SpawnXX]

JMan, you aren't going to get much cheaper than this.
Motorcycle OEM Connectors for blinkers and tail lights
Pair Yamaha 3 Pin Round Plug Turn Signal Wiring Harness Kits TSH Y | eBay

 

[jman]

@JT I have considered that option but with the oem adapters I can still remove the fairings if I do it that way I'm essentially attaching the fairing to the bike. @spawnxx I did see that however that's the wrong gender of harness I need the wire from if that makes sense. Thanks for trying to help though I may do jt's version.

 

[JT]

I know what you mean... Also buy some cheap insulated quick connectors that will solve your problem

I have a link to something similar in my JT's LED Blinker thread


Sent from my one and only iPhone 5 using Tapa 2 da talk