Search results

In the reviews, few complain that since shortie clutch lever fits only two fingers that they ache when friction zone is engaged over extended duration, like in slow moving traffic or frequent traffic light stops. How bad is it? Is it better to go with standard length adjustable levers.

Is the https://www.amazon.com/HELLA-H4-Standard-Halogen-Bulb/dp/B01BDWRAK6/ref=dp_ob_title_auto?th=1 I assume any H4 bulb would fit FZ6R, but wattage is OEM bulb? Is High Wattage - 100/55W compatible/recommended, or would it be too much load on the battery? I dont do much night riding, just...

Highbeam does not light up, but normal headlight works fine. Highbeam indicator on the dashboard turns on fine. How do I go about addressing this issue? Thanks.

Clutch lever too far out Similar to front break lever, is there a way to adjust the clutch lever so that it is closer to the bar end grip when fully disengaged? I have started doing some slow speed drills that require the clutch to be held in friction zone most of the practice duration, and...

thanks adazine for the pictures but I still dont get it all. another product description, has this circuit diagram. I assume this is what I get when I buy the product. https://i.ebayimg.com/images/g/ImUAAOSwp7taVDWq/s-l1600.jpg Since I wont need the on/off switch button, I would need to...

Look forward to the pictures and where the relay draws power from. I dont need a separate on/off switch. just want the power to all the accessories cut off when the ignition key is turned off.

I am looking for beginner instructions and part list on how to install a relay. Is there a parts list with what voltage relay to buy, what guage wire, posi tap connector, etc. and how to locate the tail light wire to draw the power from? Is there a youtube video to follow? I have heated grips...

How often should battery be replaced? I have a 2013 bike, bought used two years ago, and haven't had any starting issues to date. Battery never on a tender/trickle charger, even during winter. Bike always starts on first attempt. Not sure how old this battery is. Should a battery be replaced...

What would it involve adding Vista cruise control, if Oxford heaterz grips are already installed? Remove oxford heaterz, install this cruise control, shorten and reinstall the oxford heaterz grips? or can it be installed by making room by moving the kill switch unit away from the throttle...

I installed the oxford heated grips recently. The left grip gets a lot hotter than the right. How can I adjust it so that they both have even heat?

I used the hanger that came with ds70 even when i had the exhaust Can under the bike (now i have it on the side). The oval was diagonally oriented. I used a metal strip with holes on either end and twisted it slightly along its length, so that the hanger bolt lined up on one end, and a...

If the bike is upright, the level is about 70% of the hashes. Since I put exactly 3 qts (almost recommended 2.96 qts) with new filter, it appears this is the level manufacturer wants. In the past, when one of the shops that did oil change filled it all the way to the top of the hashes, another...

Not sure, it could have been a customized Danmoto exhaust. But it certainly was not a Delkevic.

I did an oil change and it was my first time doing it. I had the bike on side stand, drained most of the old oil and changed the filter. But when I added 3 quarts (or 2.96 as per manual), after starting the bike for 3 minutes, the dipstick level without turning is only 40% wet of the textured...

The previous owner of my bike had Marthy exhaust installed, but without the hanger. As a new rider and new to bikes, I had no awareness of an exhaust hanger and its need. None of the mechanics that worked on my bike found the hanger absence a safety risk. I had the bike lowered shortly after...

I have the delkevic complete exhaust system with ds70 muffler. my bike is lowered. Now the exhaust comes in the way when using the rear paddle stand. Other than uninstalling the muffler each time, I was looking for suggestions for addressing this interference. thanks.

Yes, it happens every time I shift, and it appears I did not notice it until now, accelerating uphill from a stop. Is it normal on all motorcycles to have freeplay of shift pedal after an up-shift? It is not an issue going on mostly straight roads, as it takes a few seconds of accelerated...

After I make a turn from a stop sign onto a highway going in the uphill direction, the shift lever refuses to tighten up and moves freely when shifting from 2nd to 3rd. The shift pedal moves freely, no matter how much I push it up and does not allow shifting to 3. I have to slightly press the...

It sounds like the red ring terminal should not be connected directly to the battery, but instead some other place that would turn off when the key is in off position. But where?

I am planning on buying these three products to have access to a simple usb phone charger near the handlebar. 1) Battery Tender Quick Disconnect Harness Link: https://amzn.com/B000NCOKZQ 2) Battery Tender 081-0069-8 Female Cigarette Adaptor for Quick Disconnect Link...