Checked mine last night, didn't need to fully remove the throttle bodies but had to unhook them and lift them back, also remove the breather hose lugs (the ones over the reed valves) and then the cover can rotate out enough counter clockwise to pull out past the throttle bodies. Took a little...
I added cob led bars to the sides of my forks, gives some extra running light and really increases the visible cross section of the bike. Fabricated some angle stock bars to fasten to the fronts of my reflectors and tapped off the circuit that went to the turn signal running lights in the front.
I'm about to do the check myself in the next week or so, a little past the first recommended check (just hit 28k on the bike this weekend) I'll report back if anything needs to be adjusted.